TAPE PLAYBACK

sdTAPE/

REC MUTE

SYNCHRO REC

 

 

REV MODE

 

 

 

wREC/

f,g REC MODE

 

REC PAUSE

 

wREC/

0–10, +10

 

 

MODE

 

REC PAUSE

CD EDIT/CHECK

 

 

 

 

f

g

 

zTAPE OPEN/

dTAPE

 

 

 

CLOSE

s

 

Music sensor

If there is a 4-second or longer blank between each track, a search for the beginning of the current or next track during playback can be done easily.

When the X indicator on the display is appearing, press f to move to the next track, or g to move to the En begininng of the current track.

When the C indicator on the display is appearing, press g to move to the next track, or f to move to the beginning of the currect track.

The search function may not be able to detect tracks under the following conditions:

PlaybackUse type I (normal) or type II (high/CrO2)tapes.

1Press zTAPE OPEN/CLOSE to open the tape tray.

2Insert the tape.

Insert with the exposed the side facing forward, and press zTAPE OPEN/CLOSE to close the tape tray.

To stop playback

Press s.

To change the playback sidePress din playback mode.To rewind or fast forwardPress for g.To reset the tape counterPress sin stop mode, and the tape counter on the display is reset to "0000".Opening and closing the tape tray will also reset the tape counter.
•Blanks of less than 4 seconds between tracks•Noisy tracks•Long passage of low-end sound•Low overall recording levels

Notes on cassettes

3Press dto start play.To select a reverse mode

Press MODE (REV MODE on the remote control) repeatedly.

•To play one side only, select p.•To play from the side facing upward to the opposite side once only, select [.•To play both sides repeatedly, select ].

•Use of 120-minute or longer tapes is not recommended since they are extremely thin and easily deformed or damaged.

•Wind up any slack in the tape with a pencil or similar tool before use. Slack tape may jam in the mechanism.

13