To prevent accidental erasure

TIMER OPERATIONS

Break off the plastic tab of the cassette tape with a screwdriver or other pointed tool.

En

Side A

 

POWER

SET

 

f,g

 

SET

TIMER

SLEEP

 

 

POWER

f

g

 

 

6STANDBY/ON

SHIFT

 

 

 

Type II tape

Tab for side

detection

A

slot

 

To record on the tape again, cover the tab openings with adhesive tape. (On type II tapes, take care not to cover the type II tape detection slot.)

Sleep timer

Turns off the unit automatically after a specified time.

1Hold down SHIFT and press SLEEP on the remote control."SLEEP" is displayed.2Press f or g repeatedly to set the sleep timer duration.

With each press, the timer duration changes in 5-minute steps between 5 to 240 minutes. If there is no button input for 8 seconds, the current setting is entered automatically. The unit turns off after the selected time.

To check the remaining time until the unit turns off Hold down SHIFT and press SLEEP on the remote control. The remaining time is displayed for 8 seconds.

Timer playback

Turns on the unit at a specified time for the specified duration. Make sure the clock is set correctly.

1Hold down SHIFT and press TIMER on the remote control repeatedly so that "5" lights up and "5 PLAY" is displayed.

2Within 8 seconds, press SET.

3Press for g to set the timer-on time, and press SET.

Each press changes the time in 1-minute steps. Holding these buttons down will vary the time in 10-minute units.

4Press for gto select the source, and press SET.
To cancel the sleep timer

Hold down SHIFT and press SLEEP on the remote control repeatedly so that "SLEEPoFF" is displayed.

•For timer play of a CD, select "CD".•For timer play of a tape, select "TAPE".

•For timer play of a radio broadcast, select "TUNER". You will select the band later in step 7.

•For timer play of the equipment connected to the AUX IN jacks, select "AUX".

16