TAPE RECORDING

Basic recordingUse type I (normal) or type II (high/CrO2) tapes.

1Press zTAPE OPEN/CLOSE to open the tape tray.

2Insert the recording tape.

Insert with the exposed side facing forward, and the side En to be recorded on first facing upward. Press

zTAPE OPEN/CLOSE to close the tape tray.3Press FUNCTION on the remote control to select the TAPE function.4Press MODE (REV MODE on the remote control) to select the reverse mode.

To record on one side only, select p. To record on both sides, select [.

5Press FUNCTION on the remote control to select the source to be recorded.6Prepare the source.
To start CD recording more easily

Insert the tape to be recorded, load the disc, and press SYNCHRO REC. Regardless of the function currently selected, CD play and tape recording start simultaneously.

•In CD stop mode, tape recording starts from the beginning of the track.When CD playback stops, tape recording stops simultaneously.

•In CD playback mode, the only current track is recorded. When the current track playback finishes, tape recording stops. To stop CD playback, press s.

To stop recording

Press s.

To pause recording (only for TUNER or AUX source)

Press wREC/REC PAUSE. Press again to resume.To record a selected set of tracks from a CDProgram the desired tracks (see "Programmed play") and then press SYNCHRO REC.
To record a 4-second blank space (only for TUNER or AUX source)Inserting 4-second blank spaces may help you locate the beginning of the track.1 Press dTAPE/REC MUTE during recording or in recording pause mode.

"REC MUTE" flashes on the display for 4 seconds (a blank space is added) and then the unit enters recording pause mode.

2 Press wREC/REC PAUSE to resume recording.To erase a tape1 Insert the tape. Set the tape to the desired point if needed. 2 Press AUX.If optional equipment is connected to the AUX IN jacks, turn it off.3 Press wREC/REC PAUSE twice.
To record CD, load a disc.

To record a radio broadcast, tune in the desired station. To record from connected external equipment, press AUX and prepare the equipment.

7Press wREC/REC PAUSE twice to start recording.

When recording a CD, CD playback starts automatically. When recording input from connected equipment, manually start playback of the source.

•Volume or tone adjustment(s) does not affect recording. When the tape reaches its end, the recording stops.

To start recording with the remote controlPress REC MODE repeatedly to display "SYNC REC" or "REC".SYNC REC: recording CD

REC: recording radio, CD or connected external equipment Then press wREC/REC PAUSE to start recording.

When selected "REC", press wREC/REC PAUSE again to start recording.

14