ADJUSTMENTS BEFORE OPERATION

Main unit: rear
dTAPE,
TUNER/BAND,
AUX, ECD

POWER

SET

14

2

3

f,g

SET

ECO/DIMMER

VOLUME

POWER 6STANDBY/ON

VOLUME (+/–)

CLOCK

fg En

SHIFT

5

1AM LOOP jack and FM 75 Ω terminals Plug in the supplied AM and FM antennas.2AUX IN jacks

Accept analog sound signals from external equipment. Connect external equipment using an optional connecting cable with RCA phono plugs (red plug to R jack, white plug to L jack). Refer also to the operating instructions for your equipment.

To switch function to external input, press AUX.

3SPEAKERS3terminals
PowerTurning the unit onPress POWER 6STANDBY/ON (POWER on the remote control).

Alternatively, press TAPE, TUNER/BAND, AUX or CD. Playback will start automatically if a disc or tape is loaded.

Turning the unit offPress POWER 6STANDBY/ON again.The unit goes into standby.
VolumeTurn VOLUME (press VOLUME (+/–) on the remote control).Adjust from 0 (minimum) to 49 and MAX (maximum).Tip:

Volume level setting is retained during power-off standby. If the unit is turned off with the volume set to 36 or higher, it is automatically turned down to 35 the next time the unit is turned on.

Connect the supplied speaker cords of the supplied speakers.
4 DIGITAL OUT (OPTICAL) jack

CD digital sound signals can be output through this jack.

Use an optical cable to connect digital audio equipment.

Remove the dust cap from the DIGITAL OUT (OPTICAL)

jack. Then connect an optical cable plug to the DIGITAL

OUT (OPTICAL) jack.

To adjust the input level of the equipment connected to the AUX IN jacks

Press AUX to select the function of external equipment connected to the AUX IN jacks, then press for g repeatedly.

The input level can be adjusted to "NORMAL" or "–6 dB".
To change a source name in the display of the AUX function

Hold down AUX and press POWER while the power is on.

AUX VIDEO TV
5 AC power cord

7