Troubleshooting
Audible Tones
The FWT generates audible tones in your telephone set, thus providing the same service characteristics as the one given by the traditional fixed line network.
The following table describes the nature of the main tones you will get when using the unit. Other standard call progress tones, such as busy tone, number obtainable or ring back tone, are provided directly by the network.
Note: Some tones can vary depending on your network operator.
Tone
1
2
3
4
5
6
7
Name
Dial
Special dial
No service
Howler
Minute minder
Voice mail alert
Positive
Nature
Regular tone when picking up the phone
Intermittent long- cadenced tone when picking up the phone
Intermittent short- cadenced tone when picking up the phone
Loud and acute tone
1 beep every minute while in conversation
When picking up the phone, three beeps and then regular tone
1 beep
It means...
The phone is in service and you can start your call.
The phone is in service and you can start your call, but you have some subscriber service (call forward, barring or hot line) activated.
No service available.
You have left the handset lifted for too long without any call in progress.
It tracks the duration of the call.
You have a voice mail in your voice mailbox. You need to call your mailbox to retrieve it.
Subscriber service successfully activated or positive interrogation indication.
8 | Negative | 3 beeps |
9 | Error | 1 deep tone |
Negative interrogation indication.
Subscriber service not activated or programming procedure not successfully performed.
Fixed Wireless Terminal: G30 and G35 models | 31 |
