Turning on the power
1 Use the supplied AC power adaptor to connect the unit to a wall outlet.
The On/Standby indicator lights up red.
Getting started
To a wall outlet
To the DC IN 12V jack
2 Press (power).
The unit turns on and the On/Standby indicator lights up green.
Tip
If you do not perform an operation for one minute on the unit after connecting the unit to a wall outlet with the supplied AC power adaptor, a demonstration will automatically begin. To stop the demonstration, press either (power), PARTY,
To turn off the power
Press (power). The unit turns off and enters standby mode.
About the On/Standby indicator
The On/Standby indicator indicates the operation status of the unit.
Operation status |
| On/Standby |
|
| indicator |
The AC power adaptor is not connected |
| Off |
The AC power adaptor is connected | The unit is in standby mode | Lights up red |
| The unit is turned on | Lights up green |
|
|
|
| An abnormality has occurred | Flashes red |
Note
Before you disconnect the AC power adaptor, make sure to press (power) to place the unit in standby mode first. If you disconnect the AC power adaptor while the unit is not in standby mode, the unit may malfunction and data may not be stored properly.
13GB