Network name (SSID): Enter the network name (SSID).

Security setting: Select [WEP64/128bit], [WPA/WPA2], or [None].

Network key: Enter the network key (security key). Hexadecimal number, ASCII code can be used.

Address setting: Select [Full automatic] or [Custom].

When you select [Full automatic]:

The unit automatically sets the IP address and the DNS server, and then moves to the display for step 6.

When you select [Custom]:

The display switches to the IP address setting display. IP address setting: Select [Auto (DHCP)] or [Manual].

When you select [Auto (DHCP)]:

The unit automatically sets the IP address, subnet mask, and default gateway.

When you select [Manual]:

Enter the values for the IP address, subnet mask, and default gateway. DNS server setting: Select [Auto] or [Manual].

 

When you select [Auto]:

 

The unit automatically sets the DNS server.

 

When you select [Manual]:

 

The DNS server setting window appears. Specify DNS 1 (preferred DNS server) and DNS 2

 

(alternate DNS server).

6

When “Switch network settings to manual.” appears, select [OK].

 

The server selection window appears.

7

Select the name of the server (such as [NAS-S55HDE])* that you want to connect to.

 

* Server name: This name appears in the [Server setting] menu of the “GIGA JUKE” Music Server.

The connection between the unit and the “GIGA JUKE” Music Server is completed.

Setting up a proxy server manually

You may have to set up a proxy server, depending on the specifications of your Internet provider or the network settings.

1 Enter the Settings menu and select [Network setting] – [Manual setting] – [Proxy setting] – [On].

Specify the IP address and port number, and then press and hold ENTER.

2 When “Switch proxy settings.” appears, select [OK].

Note

If after opening the Settings menu no operation is performed for three minutes, the setup is automatically cancelled. When this occurs, items that were entered are not saved.

20GB