Using the timer

Using the Sleep timer

You can set the Sleep timer so that the unit enters standby mode automatically after a certain period of time (Sleep timer function).

1

Press SETTINGS.

 

 

The Settings menu appears.

 

2

Select [Sleep timer].

 

3

Select the time interval from

 

[15minutes], [30minutes], [60minutes],

 

or [90minutes].

 

 

The Sleep timer is set and

appears on

 

the playback display. After the selected

 

time elapses, the volume turns down

 

gradually and the unit enters standby

 

mode automatically.

 

Tips

You can also set the Sleep timer using the SLEEP button on the remote control. Each time you press the button, the interval changes as follows.

[Off] [15minutes] [30minutes] [60minutes]

[90minutes] [Off]...

While the Sleep timer is set, press the SLEEP button on the remote control to check the remaining time before the unit enters standby mode. If you press the button again, the Sleep timer is set again.

Note

If you perform the following operations before the Sleep timer goes off, the Sleep timer resets.

Disconnect the AC power adaptor.

Turn off the unit (the unit enters the standby mode).

Perform [Network setting] in the Settings menu.

Perform [Option] – [Factory default] in the Settings menu.

Using On-timer

You can set the On-timer to start playing the desired source at a specified timer (On-timer function). You can set up to two On-timers. Make sure to set the clock before setting the On-timer (page 15).

1

Select a track or the Internet radio

 

station that you want to play with the

 

On-timer.

2

Press SETTINGS.

 

The Settings menu appears.

3

Select [On-timer].

4

Select [Timer1] or [Timer2].

5

Select [On].

 

The On-timer setting display appears.

6

Set [Start: ] (start time) and [End: ] (end

 

time).

 

Press /to change the time and press

 

ENTER to enter the setting.

 

Each time you press ENTER, the cursor

 

moves as follows.

 

“hour” (start time) “minutes” (start

 

time) “hour” (end time) “minutes”

 

(end time).

 

Press and hold /to change the

 

parameter sequentially.

7

Set the day of the week.

 

Press /to select the day and press

 

ENTER.

 

Each time you press ENTER, the selected

 

day is checked or unchecked.

 

Confirm that the day you want to set the

 

On-timer is checked, select [OK], and

 

then press ENTER.

Continued

Operation

31GB