Listening to audio data stored on a “GIGA JUKE” Music Server or a computer (Home Network function)

ProblemCauses/measures

You cannot connect the unit to Make sure that the wireless station/the wireless LAN access point is

a network.

turned on.

“Cannot connect to the server.” Make sure that your “GIGA JUKE” Music Server and computer are

 

appears.

turned on.

“A communication error

The network settings on the unit may be incorrect. Press SETTINGS

 

occurred.” appears.

and select [Device information] – [Network information] to check

“A communication error

the settings.

 

occurred. Information

The “GIGA JUKE” Music Server or computer may be unstable.

 

retrieval cancelled.” appears.

Restart it.

“GIGA JUKE Wireless Player” Confirm that the “GIGA JUKE” Music Server and the computer are

appears and the unit does not

connected to the wireless station/the wireless LAN access point

go on.

correctly.

Check the following conditions to confirm that the “GIGA JUKE” Music Server and the computer are properly prepared:

The server has started.

The server function is set to [Start].

This unit has been registered.

Place the unit and the wireless station/the wireless LAN access point close to each other.

If the ICF (Internet Connection Firewall) function is active on the computer, this may prevent the unit from connecting to the computer. You may need to change the firewall settings to allow the unit to connect. (For details on changing the firewall settings, refer to the operating manual of your computer).

If you format the system of the “GIGA JUKE” Music Server or performed a system recovery on your computer, perform the network settings again (pages 18 and 19).

The “GIGA JUKE” Music Server

You may have turned on this unit before you turned on the “GIGA

or computer does not appear in

JUKE” Music Server or the computer. Select [Update info] in the

the server selection display.

server selection display to update the server list (page 23).

 

Make sure that the wireless station/the wireless LAN access point is

 

turned on.

 

Make sure that your “GIGA JUKE” Music Server and computer are

 

turned on.

 

Check the following conditions to confirm that the “GIGA JUKE”

 

Music Server and the computer are properly prepared:

 

The server has started.

 

The server function is set to [Start].

 

This unit has been registered.

 

 

 

You cannot play audio data normally.

Repeat play or shuffle play is selected. Press SETTINGS to set [Play mode] to [Continue] (page 28).

38GB