Tip
If the unit is turned off and enters standby mode while still receiving a radio broadcast, the station is saved and appears again the next time you turn on the unit.
To update Live365 and SHOUTcast information
Select [Update info] while the list of radio stations is displayed.
The unit searches for new stations and an updated radio station list appears.
Other operations
To | Do the following |
Pause reception of | Press . Press again |
a radio broadcast | to resume the broadcast. |
Change the radio | Press /on the |
station | remote control repeatedly |
| (only when a Live365 |
| station is selected). Or press |
| to go back to the radio |
| station list and select a |
| station again. |
You can listen to the playback sound from an external portable audio device (such a “WALKMAN”) connected to the AUDIO IN jack on the unit. The playback sound is output from the unit’s speakers.
Note
Make sure to turn down the volume of the unit, otherwise the large sound output may cause damage to the unit’s speakers.
1 | Connect an external device to the |
| AUDIO IN jack on the front of the unit. |
2 | Press AUDIO IN. |
| The unit changes to the Audio In |
| function. |
3 | Start playback on the externally |
| connected device. |
| The playback sound is output from the |
| unit’s speakers. |
4 | Press VOLUME + or – to adjust the |
| volume. |
Tip
If the sound volume of the connected device is too high or too low, you can change the input level on the unit (page 34).
Note
You cannot operate the externally connected device from this unit.
Operation
29GB