White Paper T290i/T290c
| Support in the T290i/T290c |
|
|
Support of access in 2 | Yes |
phases |
|
|
|
Support of PRACH on 11 | Yes |
bits |
|
|
|
Support of GPRS re- | Yes |
selection C31/C32 |
|
|
|
Support of static and | Yes |
dynamic addressing |
|
|
|
Support of power control | Uplink = yes, Downlink is a network feature |
Uplink and Downlink |
|
|
|
Support of ciphering | GEA1 |
algorithms |
|
|
|
Support of compression | No |
algorithms |
|
|
|
Support of the QoS modi- | Yes, when initiated by the network |
fication procedure | (not by the handset) |
|
|
Downlink data rate | Up to 64,200 bps for packet data communication, using 3 time slots in |
| coding scheme |
|
|
Uplink data rate | Up to 21,400 bps for packet data communication, using 1 time slot in cod- |
| ing scheme |
|
|
Mode of operation | Class B and Class C modes of operation supported. It is possible for the |
| user to choose if the Circuit Switched services should be favored. |
|
|
R Reference point | Physical layer: PPP is supported as L2 layer in the R reference point |
| Authentication algorithms PAP, CHAP supported |
|
|
IP connectivity | PDP type IP is supported |
| IP termination in mobile or TE (laptop, PDA) supported |
|
|
Application | WAP over GPRS supported (UDP/IP and |
| SMS over GPRS |
|
|
QoS | QoS negotiation supported. Default requested QoS sent by the handset at |
| PDP context activation is reliability Class 3. Peak/Mean/Delay/Precedence |
| Class: subscribed (1,2,3). |
| Precedence class supported (1,2,3) |
| Reliability class |
| Delay classes supported (1,2,3,4) |
| Mean and peak throughput rate limited by multislot class 4 and |
|
|
PDP context | 10 PDP context descriptions stored in mobile |
| PDP context description is edited via application in mobile or via OTA |
| Simultaneous PDP contexts not supported |
| Network requested PDP context not supported |
|
|
SIM | GPRS aware, as well as non GPRS aware SIMs are supported |
|
|
60 | October 2004 |
