
Z750a_UG_AT&T_P1C_AE.book Page 22 Wednesday, September 12, 2007 8:18 AM
Voice control
By creating voice commands you can:
•Voice dial – call someone by saying their name
•Activate voice dialing by saying a “magic word”
•Answer and reject calls when you use a handsfree
To record a voice command to be used for voice dialing
1From standby select Menu > Settings
>the General tab > Voice control
>Voice dialing > Activate.
2Select Yes > New voice command and select a contact. If the contact has more than one number, select the number to add the voice command to.
3Record a voice command such as “John mobile”.
4Follow the instructions that appear. Wait for the tone and say the command to record. The voice command is played back to you.
5If the recording sounds OK, select Yes. If not, select No and repeat steps 3 and 4.
Voice commands are saved in the phone memory only. They cannot be used in another phone.
22Calling
Preflighted by 






(
) 




To rerecord a voice command
1From standby select Menu > Settings
>the General tab > Voice control
>Voice dialing > Edit names.
2Scroll to a command and select Options > Replace voice.
3Wait for the tone and say the command.
Voice dialing
You can call a contact by saying the name.
To voice dial
1From standby press and hold down a volume key.
2Wait for the tone and say a recorded name, for example “John mobile”. The name is played back to you and the call is connected.
To make a call with a handsfree
•Press the handsfree key.
The magic word
You can record and use a voice command as a magic word to activate voice dialing without pressing any keys. Your handsfree must be connected to your phone when using the magic word.
You should choose a long, unusual word or phrase that can easily be distinguished from ordinary background speech.
Bluetooth handsfree does not support this feature.