49More features
To change a passcode
1From standby select Menu >Organizer
>Password Saver.
2Enter a passcode and select Options
>Change passcode.
3Enter your new passcode and select
Cont.
4Re-enter the new passcode and select
Cont.
5Enter a checkword and select Done.
Forget your passcode?
If you forget your passcode, you must
reset the password saver. This means
that all entries in the password saver
ared eleted. The next time you enter the
password saver, you must proceed as
if you are opening it for the first time.
See To open password saver for the
first time on page 48.
To reset password saver
1From standby select Menu >Organizer
>Password Saver.
2Enter any passcode to access the
password saver. The checkword and
codes that are then shown are incorrect.
3Select Options >Reset.
4 Reset password saver? appears.
5Select Yes.
Profiles
You can change settings such as the
ring volume and vibrating alert to suit
different locations. You can reset all
profiles to the phone’s original settings.
To select a profile
1From standby select Menu >Settings
>the General tab >Profiles.
2Select a profile.
To view and edit a profile
1From standby select Menu >Settings
>the General tab >Profiles.
2Scroll to a profile and select Options
>View and edit.
To reset all profiles
1From standby select Menu >Settings
>the General tab >Profiles.
2Select Options >Reset profiles.
Time and date
To set the time
1From standby select Menu >Settings
>the General tab >Time & date
>Time.
2Enter the time and select Save.
You cannot rename the Normal profile.
Z750a_UG_AT&T_P1C_AE.book Page 49 Wednesday, September 12, 2007 8:18 AM
PPreflighted byreflighted byPreflighted by ( )( )( )