SoundCraft RK-65K manual To Enter Program Mode RK65K/RK100M, Change your Password RK65K/RK100M

Radio Key® RK-65K Operating Guide

To Enter Program Mode (RK65K/RK100M):

Using your programmer, enter your password and then press “ENTER”. (All new units are pre-programmed with the password 12345.) The LED will fl ash amber to show that the unit is in Program Mode. The unit will “time out” and return to Active (Normal) Mode in 15 seconds if no programming follows.

1 + 2 + 3 +

4 + 5 +

(Password) (ENTER)

NOTE: If fi ve incorrect passwords are entered, the unit will sound an alarm and display a red LED for 30 seconds, then return to normal mode.

Change your Password (RK65K/RK100M):

Put the unit into the Program mode, if necessary (See above). Press THRU. Then enter the sequence of digits representing the desired new password (exactly 5 digits). Then press THRU again. Repeat the new password. Press ENTER. A green light and beep means that the Password was changed. Note that 12345 is the default (factory) password; use another number sequence for best security.

Secura Key 8