Radio Key® | Operating Guide |
starting User ID Number to the unit. Press THRU. Then press the sequenceofdigitsrepresentingthedesiredendingUserIDNumber. Press THRU, then press ENTER. Present the Transponders to the reader in the desired order (making a careful record of which transponders are assigned to which User ID Numbers). If one or more Transponders are already entered into the User ID Number range you have selected, they will be overwritten. For example, to program ten transponders into User ID Numbers 1 through 10, the following sequence would be presented;
+ | 1 | + |
(ADD) | (Starting | (THRU) |
| User No. 1) |
|
+ | 1 | + 0 | + | + |
| (Ending User ID | (THRU) | (ENTER) | |
|
| Number 10) |
|
|
then present the ten transponders to the unit one at a time.
Delete a Transponder from the System:
Put the unit into the Program mode (See Page 8). Press VOID, then press the sequence of digits representing the desired User ID Number (1 - 100). Then press ENTER. A green light and beep means that the Transponder was deleted. For example, to delete the transponder for User ID Numbers 12, the following sequence would be executed;
+
(VOID)
1 | + | 2 | + |
(User ID Number 12) | (ENTER) |
Secura Key | 25 |
