SoundCraft manual Radio Key RK-65K

Radio Key® RK-65K Operating Guide

Add a Transponder (Key Tag or Card) to the System: Put the unit into the Program mode (See Page 8). Press ADD, then press the sequence of digits representing the desired User ID Number (1-100), then press ENTER. Hold the Transponder near the Unit. A green light and beep means that the Transponder was accepted. For example, to program a transponder into User ID Number 12, the following sequence would be followed;

+ 1 + 2 +

(ADD) (User ID Number 12) (ENTER)

(Hold Key Tag or Card near unit)

Record the User ID Number and Transponder ID Number.

NOTE:IfyouassignanewtranspondertoaUserIDNumberwhere another transponder was already assigned, the new transponder will replace the old transponder for that User ID Number.

NOTE: Adding the Same Transponder More Than Once If you add the same Transponder to the system more than once, the Transponder ID will be deleted from the previous User ID Number position and added to the newest User ID Number position.

Secura Key 23