Radio Key® | Operating Guide |
Add a Transponder by Entering the Transponder ID: Instead of presenting the transponder, you can also use the Programmer to enter the Transponder ID number: Put the unit into the Program mode (See Page 8). Press ADD then press the sequence of digits representing the desired User ID Number (1 - 100). Press THRU. Press the sequence of digits representing the ID number printed on the Transponder, then press ENTER. For example, to program a Transponder ID Number 995 into User ID Number 12, the following sequence would be followed;
+ | 1 | + | 2 | + |
(ADD) | (User ID Number 12) | (THRU) |
+ | 9 | + | 9 | + | 5 | + |
|
| (ID Number 995) |
| (ENTER) | ||
Record the User ID Number and Transponder ID Number in the User Log Form.
NOTE:IfyouassignanewtranspondertoaUserIDNumberwhere another transponder was already assigned, the new transponder will replace the old transponder for that User ID Number.
Add a Series of Transponders to the System:
Put the unit into the Program mode (See Page 8). Press ADD, then press the sequence of digits representing the desired
Secura Key | 24 |
