Radio Key® | Operating Guide |
You can also place a reader in this mode by entering the Program Mode (see page 8) then pressing Mode followed by “9” followed by Enter.
+ | 9 | + |
(MODE) | (Mode Number 9) (ENTER) |
While the LED is fl ashing Red/Green present one User Card for each Facility Code being used to the reader, one at a time. After you are fi nished, allow the reader to time out and return to the Normal Mode before proceeding. NOTE: An invalid facility code will beep with no LED visible.
ADDING AND DELETING USERS (RK65K)
Add A Transponder (Key Tag or Card) To The System: Place the unit in the Program Mode (See Page 8). Press Add, followed by the sequence of digits representing the Transponder ID number. Then press Enter. For example, to add transponder #12 to the reader the following sequence would be followed:
+ | 1 | + | 2 | + |
(ADD) | (User ID Number 12) | (ENTER) |
Transponder number 12 is now valid.
