Radio Key® | Operating Guide |
Delete A Series Of Transponders From The System (RK65K):
Place the unit in the Program Mode (see Page 8). Press Void, followed by the sequence of digits representing the lowest transponder ID. Then press Thru followed by the sequence of digits representing the highest number transponder. Finally, press Enter. For example, to delete transponders #1 through #10:
+ | 1 | + |
(VOID) (Starting (THRU) User No. 1)
+ | 1 | + | 0 | + |
(Ending User ID | (ENTER) |
Number 10) |
|
Transponders #1 through #10 are now void.
Set the Latch Timer (RK65K/RK100M):
Put the unit into the Program mode, (See Page 8). Press SET TIMER,thenpressthesequenceofdigitsrepresenting the desired Latch Time (0 - 65535 seconds) to the unit. Press ENTER. A green light and beep means that the Latch Timer setting was changed. (If you set the Latch Timer for “0” seconds, the actual latch time will be approximately 0.25 seconds.) For example, to set the latch timer to 15 seconds, the following sequence would be followed;
+ | 1 | + | 5 | + |
(SET TIMER) | (15 Seconds) | (ENTER) | ||
Secura Key 12
