SoundCraft manual Radio Key RK-65K

Radio Key® RK-65K Operating Guide

CONVERTING TO RK100M MODE

The RK100M has been replaced by the new RK-65K. The RK100M was designed to read randomly numbered cards and tags without facility codes (RKCM-01,RKKT-01). The RK100M unit is only able to enroll up to 100 users. If you need to replace an existing RK100M, or if you want a reader that uses random cards and tags, you may convert this product to the RK100M mode, as shown below.

In the RK100M mode, some programming steps differ from the RK-65K. The following section also describes those different program steps.

Converting between RK-65K and RK100M modes:

Place the unit in the Program Mode (see Page 8). Press MODE, followed by “5” (for RK65K mode) or “6” (for RK100M mode). Press ENTER. (RK-65K mode is the default.)

+ 5 +

(MODE) (Mode Number 5) (ENTER)

(For RK65K mode)

+ 6 +

(MODE) (Mode Number 6) (ENTER)

(For RK100M mode)

Secura Key 21