Southbend HDG-36-RE, HDG-60-M, HDG-72-RE, G-72-M, HDG-48-M, HDG-36-M Installation on Insulated Base

INSTALLATION

INSTALLATION HEAVY DUTY COUNTERLINE

Step 2c: Installation on Insulated Base

The appliance may be installed onto a flat NON-COMBUSTIBLE (but heat sensitive) surface using the optional insulated base, as follows:

1.Attach the side pieces of the insulated base (items “A” in Figure 7 below) to the front piece (item “B”) using the four sheet metal screws provided.

2.Position the insulated base on the surface where you want the appliance to be located.

3.Position the appliance on top of the insulated base. Lift the appliance only from the ends, never from the middle!

4.Go on to Step 4 on page 18.

Figure 7

A

B

PAGE 12 OWNER’S MANUAL 1182845 REV 8