SPECIFICATIONS

SPECIFICATIONS

HEAVY DUTY COUNTERLINE

CONSTRUCTION OF CHARBROILER MODELS

The front, top-rail sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized steel. The reinforced double-wall sides are fully insulated.

Each 6" section has a gas valve for independent control of flame. Each burner is covered by a stainless steel radiant or by a layer of ceramic briquettes.

The heavy cast iron grids have wide-branding (1/4") on one side and narrow branding (1/8" with grease channel) on the other side. The tilt of each grid can be adjusted. Chrome-plated grids can be ordered for cooking fish.

Figure 4

DIMENSIONS OF OPEN TOP MODELS

3.9"

2.0"

24.4"

Top View

Width (see table below)

2.8"

6.3"

11.0"

15.3"

9.0"

Front View

 

 

Side View

 

 

 

 

Model

Width

Number and Size of Burners

Total BTU

 

 

 

 

HDO-12

12.25"

2 @ 26,000

52,000

HDO-24 & HDO-24SU

24.5"

4 @ 26,000

104,000

HDO-36 & HDO-36SU

36.625"

6 @ 26,000

156,000

CONSTRUCTION OF OPEN TOP MODELS

The front, top-rail sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized steel. The reinforced double-wall sides are fully insulated.

Each burner has its own gas valve, and is covered by a heavy cast iron grate. Step-up models have elevated rear burners.

PAGE 8

OWNERS MANUAL 1182845 REV 8

Page 8
Image 8
Southbend HDG-48-RE Construction of Charbroiler Models, Dimensions of Open TOP Models, Construction of Open TOP Models