Southbend HDG-24-M, HDG-60-M Construction of Griddle Models, Dimensions of Charbroiler Models

HEAVY DUTY COUNTERLINE SPECIFICATIONS

CONSTRUCTION OF GRIDDLE MODELS

The front, sides, and 5" riser are all stainless steel. The rear and bottom panels are aluminized steel. The reinforced double-wall sides are fully insulated.

The griddle surface is high-carbon, 1" thick, polished steel plated with trivalent chromium. The chrome plate has an emissivity rating of approximately 0.08.

Each foot of griddle plate is heated by a U-shaped burner controlled by a thermostatic gas valve for independent temperature control. Each pilot is equipped with a flame failure safety device.

The base of 60" and 72" griddles consist of two burner compartments spanned by one griddle surface with one grease duct and one grease drawer.

Figure 3

DIMENSIONS OF CHARBROILER MODELS

SPECIFICATIONS

30.0"

Top View

Width (see table below)

5.3"

Front View

1.5"

21.5"

31.5"

11.0"

2.8" 29.4"

Side View

16.0"

15.1"

10.0"

2.0"

Model	Width	Number and Size of Burners	Total BTU
HDC-24 & HDCL-24	24"	4 @ 20,000	80,000
HDC-36 & HDCL-36	36"	6 @ 20,000	120,000
HDC-48 & HDCL-48	48"	8 @ 20,000	160,000

OWNER’S MANUAL 1182845 REV 8 PAGE 7