Southbend SB1023 manual Controls, Control panel

Model SB1023 O P E R A T I O N For Machines Mfg. Since 8/09

Controls

Refer to Figures 10–11and the following descriptions to become familiar with the basic controls of this machine.

A.Longitudinal Travel Handwheel: Moves the table back and forth along the longitudinal axis (X-axis).

B.Center Table Stop: Provides a barrier for the table stops to limit table movement.

C.Table Stop: Adjusts along the length of the table to limit longitudinal travel.

D.Cross Axis Lock Knob: Locks the cross table movement (Y-Axis).

E.Elevation Handwheel: Controls vertical movement of the grinding wheel assembly.

F.Cross Travel Handwheel: Moves the table forward and backward along the cross axis (Y-axis).

G.Spindle On Button: Supplies power to the grinding wheel motor.

H.Emergency Stop (Off) Button: Cuts power to the grinding wheel motor.

G

H

Figure 11. Control panel.

E

C

	B
F	D
	A

Figure 10. Basic controls.

-18-