SOYO SOYOTM manual Bttn

30 BIOS Setup

HDD Power Down When the set time has elapsed, the BIOS sends a command to the HDD to power down, which turns off the motor. Time is adjustable from 1 to 15 minutes. The default setting is Disabled. Some older model HDDs may not support this advanced function.

VGA Active	Choose Enabled (default) or Disabled.
Monitor	Enabled Ð	enables the power management
		timers when a Òno activityÓ event
		is detected.
Soft-Off by POR-	Choose Instant-off or Delay 4 Sec (default).
BTTN	Delay 4 Sec turns off the system power 4
	seconds after pushing the power button
CPU Fan Off In	Choose Enabled to stop the CPU fan when the
Suspend	system runs into the suspend mode (refer to
	Power Management Setup.)
Resume by Ring	Choose Enabled or Disabled (default). This
	function only works when the computer is
	powered on.
	Enabled Ð	The system will resume active
		when modem is ringing.
	Disabled Ð	The system will not resume when
		modem is ringing.
Resume by Alarm	Choose Enabled or Disabled (default).
	Enabled Ð	Set alarm to wake up the system
		either by the date (1-31) or time
		(hh:mm:ss), and if the date is set to
		0, it means that the system will
		wake up by the alarm everyday.
	Disabled Ð	The system ignores the alarm.
IRQ8 Clock Event	Choose Enabled or Disabled (default). Alarm
	function will be activated when this function is
	enabled.
IRQ[3-7,9-15], NMI	Choose Enabled (default) or Disabled. The
	BIOS monitors these items for activity. If
	activity occurs from the Enabled item the
	system wakes up.