Hareware Setup | 7 |
CPU Type Configuration
This section shows you how to configure your CPU step by step. Note that you need to check the CPU voltage before installation. This board supports the Intel P54C/P55C/MMX, Cyrix 6x86/6x86L/6x86MX, and AMD 5K86/K5/K6 CPUs. With the MMX technology supported, you should be able to use MMX CPUs and configure these CPUs as normal dual voltage CPUs.
❑Step 1: Frequency Setting
P54C/P55C – 75/90/100 CPU Settings (1.5 x clock) AMD K5 – PR75/PR90/PR100/PR120/PR133 (1.5 x clock)
P54C/P55C– 75/50 MHz AMD K5 – PR 75/50 MHz
ON
1 2 3 4 5 6
SW1
P54C/P55C– 90/60 MHz AMD K5 – PR 90/60MHz AMD K5 – PR 120/60 MHz
ON
1 2 3 4 5 6
SW1
P54C/P55C– 100/66 MHz
AMD K5 – PR 100/66 MHz
AMD K5 – PR 133/66 MHz
ON 
1 2 3 4 5 6
SW1
Lithium
Battery
82439TX
W25P240AF
ON
1 2 3 4 5 6
SW1
Figure 2Ð1Ð1. CPU Jumper Settings
Note: 1. You must equip the CPU with a fan and heat sink for system stability.
