SOYO SY-D6IBA manual Cooling Fan Installation, Infrared IR1, CPU Cooling Fans FAN 1, FAN

Hardware Setup SY-D6IBA

Please install according to the following pin assignment:

Wake-On-LAN

JP44 Pin Assignment

5VSB

GND

MP - Wake-up

1 2 3

2. Infrared (IR1)

Plug the 5-pin infrared device cable to the IR1 header. This will enable the infrared transfer function. This Motherboard meets both the ASKIR and HPSIR specifications.

Please install according to the following pin assignment:

Infrared (IR) Connector

IR1 Pin Assignment

VCC IRRX GND IRTX

1 2 3 4 5

Step 9. Cooling Fan Installation

1. CPU Cooling Fans (FAN 1, FAN 2)

After you have seated the Single or Dual CPU properly on the Motherboard, attach the 3-pin fan cable from each CPU to the corresponding CPUFAN connector FAN 1 or FAN 2 on the Motherboard.

The CPU fans will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)

18