SOYO SY-D6IBA manual Ide, On-Chip PCI IDE Primary Secondary

BIOS Setup Utility		SY-D6IBA
3-8.1 IDE Device Controls
IDE Controls	Setting	Description	Note
IDE HDD Block Mode
	Disabled
	Enabled	Invokes multi-sector	Default
		transfer instead of one
		sector per transfer. Not
		all HDDs support this
		function.

IDE

ØPrimary Master PIO

ØPrimary Slave PIO

ØSecondary Master PIO

ØSecondary Slave PIO

mode 0-4 0 is the slowest speed 4 is the fastest speed

Auto For better performance Default and stability, we

suggest you use the Auto setting to set the HDD control timing.

IDE

ØPrimary Master UDMA

ØPrimary Slave UDMA

Disabled

Auto	Select Auto to enable	Default
	Ultra DMA Mode
	support.

On-Chip PCI IDE

ØPrimary

ØSecondary

Disabled	Turn off the on-board
	IDE
Enabled	Use the on-board IDE	Default

3-8.2 Onboard SCSI Subsystem Controls

SCSI Subsystem Controls

Onboard PCI SCSI Chip

Setting	Description	Note
Disabled
Enabled	Enables the on-board	Default

SCSI function. Also, allows you to configure the SCSISelect ™ BIOS utility. (Press <Ctrl-A>during boot-up to enter the SCSI BIOS utility.)

56