SOYO SY-D6IBA manual PM Events Setting Description VGA Active, Monitor, IRQ 8 Break, Suspend

BIOS Setup Utility		SY-D6IBA
3-5.3 PM Events
PM Events	Setting	Description	Note
VGA Active
	Disabled		Default
Monitor	Enabled	Enables the power
		management timers when a [no
		activity] event is detected on the
		monitor.
IRQ 8 Break
	Disabled		Default
Suspend	Enabled	Alarm function is active.

3-5.4 Reload Global Timer Events

Power Down &	Setting	Description	Note
Resume Events

IRQ [3-7,9-15],

NMI

Disabled

Enabled The system monitors these Default elements for activity. The

system will resume if an [IRQ activity] is detected.

IDE0, IDE1	Disabled		Default
ØPrimary	Enabled	Enables the PM timers when
ØSecondary		[No Activity Event] is detected.
Floppy Disk	Disabled		Default
	Enabled	Enables the PM timers when
		[No Activity Event] is detected
		on the floppy disk drive.
Serial Port	Disabled
	Enabled	Enables the PM timers when	Default
		[No Activity Event] is detected
		on the serial port.

Parallel Port

Disabled Default

Enabled Enables the PM timers when [No Activity Event] is detected on the parallel port.

50