SOYO SY-KT600 DRAGON Plus Motherboard quick start Configure Memory, ABR Jumper, Number of Memory

SY-KT600 DRAGON Plus Quick Start Guide

ABR (Anti Burn Regulator)

SOYO's ABR (Anti Burn Regulator) is a specially designed hardware circuit that works hand in hand with the CPU’s internal sensor in monitoring the temperature of the CPU and prevent it from overheating.

Once the heat accumulated in the CPU is over the set limit. ABR will automatically shut down the system power and warn you with a beeping sound. To de-activate the beeping sound, un-plug the AC power cord. We recommend you to check the cause of the overheating and let the processor cool down before powering on the system.

Note: ABR supports AMD Athlon XP and Morgan CPU. Thunderbird and Duron CPUs are not supported

Some early versions of the 2400+ and 2600+ XP CPUs when used in this motherboard will automatically activate the ABR function, thus making a beeping sound and shut down your system. If this compatibility issue arises, you need to disable the ABR function via the ABR hardware jumper.

Setting Enabled Disabled

ABR Jumper

1 2 1 2

Step 2. Configure Memory

Your board comes with three DIMM sockets, providing support for up to 3GB of main memory using unbuffered and ECC DIMM modules. On this motherboard, DRAM speed can be set independent from the CPU FSB speed.

Memory Configuration Table

Number of Memory	DIMM 1		DIMM 2	DIMM 3
Modules
RAM Type	DDR RAM PC2100/PC2700/3200
		(non-register & ECC)
Memory Module Size (MB)
		128 / 256 / 512 / 1024 MB

15

Hardware Installation