SY-KT600 DRAGON Plus Quick Start Guide

VGA Issue

After waking up from Suspend to RAM or Standby mode, the screen has no display but I can hear the hard disk operating

1.Install the VIA 4 in 1 driver set.

2.Check the VGA card manufacturer for a driver update (if using a different video card then the onboard video), and make sure the VGA card supports the Suspend to Ram function.

3.Update your VGA card’s BIOS (in the case of a video card other then the onboard video). Check your VGA card manufacturer for more details.

Audio Issue

How can I disable the on-board Audio?

Go to the SOYO Combo Feature in BIOS setup, then set the “AC97 Audio” setup option to disabled.

I cannot get the sound working on my system.

1.Check if the speaker wire is connected to the line out connector on the M/B.

2.Check if the speaker power is powered on.

3.Install the audio driver supplied on our driver disc.

4.Check BIOS setup if “AC97 Audio” setup option is enabled.

5.If sound already installed, check our website for audio driver updates.

I cannot get the sound working using 5.1 channel speakers.

1.Install the audio driver and application. Check driver installation for more info.

2.Check if the settings in the VIA Mixer program and in the Control Panel are correct.

3.Check if the speaker connection to the M/B is correct.

4.Make sure the software setup is correct. Check the manual for more info.

The sound is working in my system, but when I play CD music from the CD-ROM, I do not get any sound. What is wrong?

This is because the 3-wire audio cable from the CD-ROM to the on-board CDIN1 connector in the M/B is not connected. See the beginning of this guide for the location of CDIN1.

34

Page 34
Image 34
SOYO SY-KT600 quick start How can I disable the on-board Audio?, Cannot get the sound working on my system