Speco Technologies CVC-927PTZ instruction manual Setting Dome Camera Address ID

2.4 Setting Dome Camera Address (ID)

To prevent damage, each dome camera must have a unique address (ID). When installing multiple dome cameras using a multiplexer, it is suggested that the dome camera address match the multiplexer port number.

If you want to set the address more than 999, you should contact the service provider.

Example: Port 1 = Dome 1, Port 2 = Dome 2 … Port 16 = Dome 16. If more than 16 dome cameras are installed using two or more multiplexers, ID of the dome camera should be ID of MUX x No. of camera IN. (e.g. multiplexer ID= n, Camera IN= m then ID of Dome =16x(n-1)+m )

Refer to Figures 4-5 for setting the dome camera address (ID) and protocol selection.

S3

S2

S1

6	7
5

4
	3
6	7
5
4
	3
6	7
5
4
	3

8 8

9
	0
2	1
	1
8	8
9
	0
2	1
	1
8	8
9
	0
2	1
	1

DOME ID	S3	S2	S1
1	0	0	1
2	0	0	2
.	.	.	.
999	9	9	9

Figure 8– Setting Dome Camera Address (ID)

7