• OSD DISPLAY
DISPLAY SETUP
CAMERA TITLE | : DOMEID |
VIEW DIRECTION | : OFF |
DOME OSD DISPLAY | : ON |
AREA DISPLAY | : OFF |
SAVE AND EXIT(ESC TO CANCEL)
CAMERA TITLE | : 8 CHARACTER CAN BE SET |
VIEW DIRECTION | : ON / OFF |
DOME OSD DISPLAY | : ON / OFF |
AREA DISPLAY | : ON / OFF |
• VIEW DIRECTION
“ON” sets current direction as N(north) and the coordinate angle to 000. “OFF” hides the directional title. Every 90 degrees of clockwise rotation will change the title to E(East), S(South), W(West). If using the ON/OFF option frequently, it is recommended that you set “North” as a Preset. Recall the “North” Preset before enabling the directional title.
• DOME OSD DISPLAY
All display or title will disappear when DOME OSD DISPLAY sets OFF
• AREA DISPLAY
If this option is enabled, the nearest area title will be displayed when the camera is moving whether by manual operation, Auto Scan, or Pattern. Select ON or OFF by pushing the Joystick to the right or to the left. The Dome camera’s OSD will override this function (Dome camera’s OSD must be enabled).
VIEW ANGLE SETUP
VIEW ANGLE SETUP
PANNING RANGE |
|
FLIP | : ON |
TILT OVER ANGLE | : W/O BUBBLE |
STABILIZER | : ON (OFF) |
SAVE AND EXIT(ESC TO CANCEL)
STABILIZER When the Image Stabilizer Function is ON, it helps in obtaining a stable image free of vibration caused by jarring movements. For a vibration frequency of around 10 Hz, correction is approximately 90%.(HID2404SHE11X model only)
28
