Applications and Setups 5
DG711 and DG511 Pipe Laser User Guide 43
1211 Laser Plummet Line Setting 5.4.8
The laser plummet may be used in
place of the Plumb-bob by
attaching it under the tripod or
manhole mount.
1Position the laser plummet over
the laser’s bull’s-eye reflective
target into the manhole mount or
tripod replacing the 5/8 x11
attachment thread.
2Quickly turn the product upside
down to activate the compensator
and turn the power switch "on".
3If the bull’s-eye target cannot
be seen, align the Laser Plummet
to the plus sign on the positive
grade button on the keypad or
anywhere along the center of the
laser.
4In an over-the-top setup, set the
laser on a tripod and align the
Laser Plummet over the first grade
stake.
Second Far-Point Alignment 5.4.9
1Simultaneously press both Left
and Right Line buttons to center
the laser’s ±10° of line travel.
2Press either Line button to align
the laser beam to the second
control point. If using a wireless
remote control, point the remote
towards the laser and press the
appropriate line button.
Note – Line speed increases the
longer you press the line button. To
slow the line speed, release the line
button then press again.
Next manhole