![](/images/backgrounds/275650/bg6.png)
For detailed installation and operating instructions, follow the instructions
given in this manual for this laser.
Laser Safety 0.0.1
The maximum radiant power
output of this laser is less than
5 mW. Use only the targets
supplied with this product.
Controls are listed on the radiation
control drawings.
CWarning – Use of controls
or adjustments
performance of
procedures other than
those specified may result
in higher dosage of laser
exposure.
To help you comply with your
government regulations, a laser
safety kit is supplied with every
laser. This kit contains operator
qualification cards and a sign that
should be posted near the laser
whenever it is in use.
As with any visible laser device,
observe the following safety rules:
• Never look directly into a laser
beam or point the beam into the
eyes of others. Set the laser at a
height that prevents the beam from
shining directly into people’s eyes.
• Do not remove any warning
signs from the laser.
• Make sure that only properly
trained people use this product.
• If service is required, which
results in the removal of the outer
protective cover, factory-trained
personnel must perform this.
Certification 0.0.2
The IEC and the United States
Government Center of Devices for
Radiology Health (CDRH) has
classified this laser as a Class
3R/3A laser product. This laser
complies with IEC/EN
60825-1:2001, CDRH 21 CFR
1040.10 and 1040.11.