Applications and Setups 5
DG711 and DG511 Pipe Laser User Guide 47
Large Pipe 5.4.14
The laser can be set directly on the
flow line using the various
mounting plates or a 1244 T-bar for
increased stability and an
unobstructed flow line.
1Set Grade Elevation, and Line
into the Laser for large pipe
applications.
2Set an adjustment pipe target so
that the targets’ bull’s-eye is at the
same distance above the invert as
your laser.
3Place the pipe target in the last
section of the pipe that has been
checked to be at the correct grade,
elevation and line.
4Adjust the pipe target until it’s
level vial reads level.
5Align the laser to the target’s
bull’s-eye using the line buttons on
the laser or the Wireless Remote.
6Lay Pipe – Set the target in
each new section of the pipe and
adjust the pipe until the laser
intersects the target’s bull’s-eye
while the target is level.
Level
vial