SpectraLink 72-1084-02 manual NetLink e340/i640 Wireless Telephone Configuration, Admin Menu

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks ICP and 5220 IP Phone emulation

4. NetLink e340/i640 Wireless Telephone Configuration

The NetLink e340/i640 Wireless Telephones should be provisioned in the supported Mitel Networks VoIP solution in the same manner as the Mitel Networks 5220 Internet Telephones. Each Wireless Telephone may be configured for site-specific requirements by opening the Admin menu and selecting options or entering specific information. Any settings entered in the Admin menu must conform to system settings. Only the Wireless Telephone being configured is affected by the Admin menu settings.

The Wireless Telephone user may select several usability options from the Standby menu, described below in the User-defined Preferences section. This information is also provided in the end user manual.

4.1The Admin Menu

The Admin Menu contains configuration options that are stored locally (on each Wireless Telephone). Every Wireless Telephone is independent and if the default settings are not desired, the admin options must be set in each Wireless Telephone requiring different settings.

Opening the Admin Menu

1.With the Wireless Telephone powered OFF, simultaneously press and hold the

Power On and Power Off keys.

2.Release the Power On key, then release the Power Off key. The Admin Menu displays.

If an admin password has been set, the display will require its entry before opening the Admin Menu. If no password is set, the display will proceed directly into the Admin Menu.

Entering and editing Admin Menu options

An asterisk (*) next to an option indicates that it is selected. The default settings are shown in the table below with an * prior to the option. Use the Up, Down, and Select side buttons and the softkeys to navigate and select:

Up/Down buttons:	display previous/next menu item.
Select button:	selects the menu item or option.
OK softkey	selects the menu item or option.
Save softkey:	saves the entry.
Bksp softkey:	backspaces to allow editing of entry.
Cncl softkey:	cancels edit and returns to previous menu level.
Up softkey:	returns to previous menu level.
Exit softkey:	exits the menu (at the top level).
END CALL key:	exits to standby state (from any level)

PN: 72-1084-02-B.doc Page 12