SpectraLink 72-1084-02 manual Message Description Action

Models: 72-1084-02

1 42
Download 42 pages 9.99 Kb
Page 37
Image 37

 

SpectraLink Corporation

Setup and Administration—NetLink e340/i640 Wireless Telephone

 

 

 

 

Mitel Networks ICP and 5220 IP Phone emulation

 

 

 

 

 

 

 

 

Message

 

Description

Action

 

 

CRC Code Error

The software which has been TFTP

Try the download again, it is

 

 

 

downloaded has a bad redundancy

possible the software was

 

 

 

code check.

corrupted during download. If the

 

 

 

 

 

error repeats, check that the

 

 

 

 

 

download image on the TFTP

 

 

 

 

 

server is not corrupted.

 

 

 

 

 

 

 

Code Mismatch!

The software loaded into the

Replace the software image on the

 

 

 

Wireless Telephone is incorrect for

TFTP server with software that is

 

 

 

this model phone.

correct for the phone model.

 

 

 

 

 

 

 

DHCP Error (1-4)

DHCP Error 1

The Wireless Telephone cannot

 

 

 

 

 

locate a DHCP server. It will try

 

 

 

 

 

every 4 seconds until a server is

 

 

 

 

 

located.

 

 

 

 

 

 

 

 

DHCP Error 2

The Wireless Telephone has not

 

 

 

 

 

received a response from the

 

 

 

 

 

server for a request to an IP

 

 

 

 

 

Address. It will retry until a server

 

 

 

 

 

is found.

 

 

 

DHCP Error 3

The server refuses to lease the

 

 

 

 

 

Wireless Telephone an IP

 

 

 

 

 

Address. It will keep trying.

 

 

 

 

 

 

 

 

DHCP Error 4

The server offered the Wireless

 

 

 

 

 

Telephone a lease that is too short.

 

 

 

 

 

The minimum lease time is 10

 

 

 

 

 

minutes but SpectraLink engineers

 

 

 

 

 

recommend at least one hour

 

 

 

 

 

minimum lease time. The Wireless

 

 

 

 

 

Telephone will stop trying.

 

 

 

 

 

Reconfigure the server and power

 

 

 

 

 

cycle the Wireless Telephone.

 

 

DHCP Lease Exp

The Wireless Telephone’s DHCP

The Wireless Telephone failed to

 

 

 

lease has expired, and the call (if

renew its DHCP lease, either

 

 

 

any) cannot continue.

because the DHCP server is not

 

 

 

 

 

running, or because the

 

 

 

 

 

configuration has been changed by

 

 

 

 

 

the administrator. The Wireless

 

 

 

 

 

Telephone will attempt to negotiate

 

 

 

 

 

a new lease, which will either work,

 

 

 

 

 

or change to one of the above

 

 

 

 

 

DHCP errors (1-4).

 

 

 

 

 

 

 

DHCP NACK error

A NACK (Negative ACKnowledge)

The DHCP lease currently in use

 

 

 

was received from the DHCP server.

by the Wireless Telephone is no

 

 

 

 

 

longer valid, which forces the

 

 

 

 

 

Wireless Telephone to restart. This

 

 

 

 

 

problem should resolve itself on

 

 

 

 

 

the restart. If it does not, the

 

 

 

 

 

problem is in the DHCP server.

 

 

 

 

 

 

 

PN: 72-1084-02-B.doc

Page 37

Page 37
Image 37
SpectraLink 72-1084-02 manual Message Description Action