SpectraLink Corporation | Setup and |
| Mitel Networks ICP and 5220 IP Phone emulation |
2.1Quick Start Guide
1.A wireless LAN must be properly configured and operational through the use of 802.11b wireless access points (APs) listed on the NetLink Wireless Telephone Access Point Compatibility matrix.
2.A TFTP Server must be available on the network in order to load the appropriate software into the Wireless Telephones. See the License Management section for detailed instructions for loading software on Wireless Telephones.
3.The supported Mitel Networks VoIP solution must be connected to your network and completely operational.
4.The NetLink SVP Server, which facilitates the QoS on the wireless LAN for the Wireless Telephones, must be on the same subnet as the Wireless Telephones and have the proper versions of software.
Visit http://www.spectralink.com/service/software.html to download the latest NetLink SVP Server software.
Ensure you have the following versions:
173 svp100.toc
174 zvmlinux
175 flashfs
5.Configure your Wireless Telephone to ensure that it is associated with the Wireless LAN, has the appropriate software, and has the correct IP Address for the supported Mitel Networks IP telephony system. See the License Management section for detailed instructions for loading software onto Wireless Telephones.
PN: | Page 6 |
