![](/images/new-backgrounds/1257267/25726735x1.webp)
SpectraLink Corporation | Setup and |
| Mitel Networks ICP and 5220 IP Phone emulation |
characters. (Use the 2 and 3 keys to access hexadecimal digits
Rotation Secret: This is used for proprietary WEP key rotation. Refer to your custom document if this feature is supported in your system.
Cisco FSR (Fast Secure Roaming) In order to provide the highest level of security without compromising voice quality on Cisco Aironet wireless LAN access points, SpectraLink and Cisco Systems have cooperated to implement the Fast Secure Roaming mechanism. FSR is designed to minimize call interruptions for Wireless Telephone users as they roam throughout a facility. Existing Aironet 350, 1100, and 1200 APs may require a firmware upgrade to support FSR. Cisco FSR requires advanced configuration of the Cisco access points in your site. See your Cisco representative for detailed documentation on configuring your access points and other required security services on your wired network. To configure Cisco FSR in your Wireless Telephone, you must enter a Radius Server username and password into each phone.
Username: Enter a username that matches an entry on your Radius server. Usernames are alphanumeric strings, and can be entered using the alphanumeric string entry technique.
Password: Enter the password that corresponds to this Username.
OAI On/Off
SpectraLink’s Open Application Interface (OAI) enables
If you have an OAI Gateway installed in your system, OAI may be optionally enabled in each Wireless Telephone. You may select whether the Wireless Telephone should attempt to connect to the SpectraLink OAI Gateway by choosing either the Enable or Disable options in this menu.
If OAI is enabled, and an OAI IP Address is available to the telephone (either via DHCP or Static IP configuration), the telephone will communicate with the OAI Server at power on, and periodically while it is powered on. If you don’t have a SpectraLink OAI Gateway installed at your site, you should disable the OAI feature to preserve network bandwidth and battery life.
Admin PW
The Admin PW (password) controls access to the administration functions in the Admin Menu. The password must be set in each Wireless Telephone for which controlled access is desired. Wireless Telephones are shipped without any Admin Menu password.
If you exit with no entry, the password is erased and the display will not require it before displaying the Admin Menu.
PN: | Page 18 |