SpectraLink 72-1084-02 manual User-defined Preferences, Standby menu item Nd Level Rd Level

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks ICP and 5220 IP Phone emulation

4.2User-defined Preferences

The following user-defined preferences are also covered in the NetLink e340/i640 Wireless Telephone user guide. The system administrator can refer to this list for more information about customizing Wireless Telephone settings.

To configure the following options, the Wireless Telephone must acquire the system (no error message may display) and be at the extension display. This is the standby state. While in the standby state, press and hold FCN briefly to open the user options menu. Use the following keys to display and select options:

Up/Down buttons:	display previous/next menu item.
Select button:	selects the menu item or option.
OK softkey	selects the menu item or option.
Save softkey:	saves the entry.
Bksp softkey:	backspaces to allow editing of entry.
Cncl softkey:	cancels edit and returns to previous menu level.
Up softkey:	returns to previous menu level.
Exit softkey:	exits the menu (at the top level).
END CALL key:	exits to standby state (from any level)
Standby menu item	2nd Level	3rd Level
Ring Type	Telephone ring	Normal Ring
		Vibrate Ring
		Vib/Norm Ring
	Auxiliary ring 1	“
	Auxiliary ring 2	“
Noise Mode	Normal
	High
	Severe
Alias IP Addr
Current IP Addr
Extension
Mitel options	Current RTC IP
	Current TCP Port
	Current RTP Port
Push-to-talk	Channel	1-8
	Enable/Disable	Enable
		Disable

Ring Type: Select Ring Type then Telephone Ring to change the standard ring used for normal operation. From the Telephone Ring menu, select either Normal Ring (an audible alert), Vibrate Ring or Vib/Norm Ring (vibrate for five seconds and then audible alert for subsequent rings). The Auxiliary Ring modes are reserved for future use. The ring type currently in use displays with an asterisk (*).

PN: 72-1084-02-B.doc Page 19