SpectraLink Corporation | NetLink e340/h340/i640 Wireless Telephones and Accessories User Guide |
NetLink Dual Chargers
NetLink e340 Wireless Telephone | NetLink i640 Wireless Telephone |
In DCE200 Dual Charger | in DCX200 Dual Charger |
Overview The NetLink Dual Charger is a
Set up the Dual Charger by first obtaining the appropriate SpectraLink power supply for the country or region. Place the Dual Charger on a flat, horizontal surface and plug the power supply into the Dual Charger and into an appropriate wall outlet.
The user must end any call in progress by pressing the End Call key on the handset before placing it into the Dual Charger. Do not remove the Battery Pack. The handset may be off or in standby mode during charging.
Place the handset face forward into the Dual Charger front slot. Place a spare Battery Pack in the rear slot, charging contacts down. The front slot takes charging precedence; the Battery Pack in the rear slot will begin charging when the handset in the front slot is fully charged or when the front slot is empty.
Indicator light When the handset or Battery Pack is seated correctly, the corresponding indicator light will come on. A bright indicator means the Battery Pack is charging, a dim indicator means the Battery Pack is waiting to charge. The indicator light will not come on when the handset is incorrectly seated, the slot is empty or when the Dual Charger has no power applied. If the indicator light is off or flashing, it means the handset or Battery Pack is incorrectly seated. Remove the handset or Battery Pack and reinsert. If the LED continues to blink or starts blinking at any time during the charging process, it indicates that there is a problem with the Battery Pack that makes it unusable. Do not continue to charge the Battery Pack. Dispose of it properly and do not attempt to use it in the handset. Do not attempt
Part Number: | Page 30 |
