Sprint Nextel L7C manual Using Speed Dialing, For Speed Dial locations 2-9 One-Touch Dialing

Using Speed Dialing

You can store up to 1000 numbers in your phone’s speed dial memory. With this feature, you can speed dial entries using one key press for locations 2-9, two key presses for locations 10-99, and three key presses for locations 100-999, and four key presses for location 1000.

Note:

You must enable speed dialing before you can use it. See “Calling Options” on page 60 for instructions.

Speed dialing is not available when you are roaming; when you are roaming off the Nationwide Sprint PCS Network, you must always dial using 11 digits (1 + area code + number).

For Speed Dial locations 2-9 (One-Touch Dialing):

▶Press and hold the appropriate key for approximately two seconds. The display screen confirms that the number has been dialed when it shows “Connecting...”.

For Speed Dial locations 10-99 (Two-Touch Dialing):

1.Press the first digit.

2.Press and hold the second digit for approximately two seconds. The display screen confirms that the number has been dialed when it shows “Connecting...”.

For Speed Dial locations 100-999 (Three-Touch Dialing):

1.Press the first two digits.

2.Press and hold the third digit for approximately two seconds. The display screen confirms that the number has been dialed when it shows “Connecting...”.

Note

For Speed Dial location 1000, press 100 and then press and hold the final 0. Location 1000 cannot be used if Abbreviated Dialing is active page 37.

38 Section 2A: Phone Basics