Sprint Nextel SP-514 owner manual Changing the Channel, Using Redial

43-5514.fm Page 14 Wednesday, August 18, 1999 12:47 PM

Telephone Operation

CHANGING THE CHANNEL

The SP-514 scans 25 channels (frequency pairs used between the base and the handset) and automatically selects a clear channel each time you make or receive a call.

If you hear other conversa- tions or excessive noise dur- ing a call, press CHANNEL on the handset to select a differ- ent channel.

Note: If the handset is too far from the base, the channel might not change. Move clos- er to the base and try again.

USING REDIAL

You can quickly redial the last number dialed. Simply lift the handset and press PHONE.

When you hear the dial tone, press REDIAL.

Notes:

² The redial memory holds up to 16 digits, so you can redial long-distance as well as local numbers.

²We recommend you not use REDIAL to dial numbers that include a tone entry. This could result in a wrong number being dialed. (See “Using Tone Services on a Pulse Line” on Page 16.)

²The redial memory only stores digits entered after you press FLASH (see “Using Flash” on Page 15).

14