Sprint Nextel SP-514 owner manual Using Tone Services on a Pulse Line, Using PAGE/HANDSET Locator

43-5514.fm Page 16 Wednesday, August 18, 1999 12:47 PM

Telephone Operation

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank-by-phone, require tone sig- nals. If you have pulse service, you can still use these special tone services by following these steps.

1Dial the service’s main number.

2When the service answers, press TONE ( ). Any additional numbers you dial are sent as tone signals.

3After you complete the call, return the handset on the base or press PHONE. The phone automatically resets to pulse dialing.

USING PAGE/HANDSET LOCATOR

You can use the SP-514 as a pager and handset locator between the base and the handset. This is useful if the handset is away from the base and you want to locate it, or if you want to signal the person holding the handset.

To page the person who has the handset or to locate the handset when the phone is not in use, press PAGE/ HANDSET LOCATOR on the base. The keypad lights and the handset sounds a three- beep signal. If you want the handset to beep for a longer time, hold down PAGE/HAND- SET LOCATOR for about 4 seconds. The handset beeps for about 3 minutes.

16