Getting Started
Before you can use your Sprint Mobile Broadband USB Modem, you must:
1.Install the Sprint PCS Connection Manager Software, located on the installation CD, onto your computer.
Note: Before installing your new software, delete or uninstall any previously existing modem or dialer software from your system.
Do not connect the device to your computer until
you have installed the Sprint PCS Connection Manager Software onto your PC or until instructed to do so by the installation CD.
2.Connect the USB modem to your computer’s USB port. Windows will detect the device and automatically install the necessary device drivers.
Note: A driver is software that forms the interface between a device (such as the Sprint Mobile Broadband USB Modem) and the operating system on your PC.
3.Launch the Sprint PCS Connection Manager Software application.
4.Activate your Sprint Mobile Broadband USB Modem and Sprint PCS account, unless the device was preactivated. If your device has not previously been activated, the Activation Wizard will automatically launch and guide you through the process.