CS4000 Mini Controller with Ethernet
9.Select the
This is the communications port to which the null modem cable is attached.
a. Click the Com Port menu in the TINI Ethernet Flash Utility window. See Figure
Figure 5-2. Selecting the COM Port Menu
b.From the Com Port menu, select Open COM Port.
c.In the Select COM Port to Open window, there is a
Figure 5-3. Selecting ‘COM1’ RS-232 Port
NOTE: If, for some reason COM1 is unavailable, you may select a different communications port. If you do select a different port, make sure that the null modem cable is inserted into this port in Step 3. If you select a different communications port instead of COM1, then you will see that port substituted wherever you see ‘COM1’ written in this procedure.
d. Click OK.
Page |