Operating Instructions | 30SS, 36SS, 45SS |
Transmission Control
Your snow blower is equipped with an easily adjustable transmission control, which can be adjusted for forward and reverse speed.
There are six forward and two reverse speeds.
To change the speed, pull the handle out to the right and move the handle to the desired speed.
DO NOT shift gears while the transmission is engaged. Come to a complete stop and disengage the transmission handle before switching speed or switching from forward to reverse.
Engage Transmission Drive
To engage the transmission drive squeeze the right lever to the hand grip.
To disengage, let go of the right lever.
To Stop Engine
To stop the engine, pull the safety key up until the engine and augers/impeller stops running. For safety, it is recommended that you remove the key when not using the snow blower.
WARNING! Do not operate the snow blower with defective guards, shields, or without the safety devices securely in place.
Engage Augers/Impeller Control
To engage the augers/impeller drive, squeeze the left lever to the handgrip.
To disengage release the left lever.
IMPORTANT! The snow blower belts are adjusted to ensure the augers stop turning within five (5) seconds of
releasing the impeller control lever. If you are making any belt adjustments whatsoever, for your safety and the safety
of others around you, you must ensure the belts are
Rev: 12/21/2011
15
