Operation Safety Precautions | 30SS, 36SS, 45SS |
Clearing A Clogged Chute—Safety Precautions
1.SHUT THE ENGINE OFF!
2.Wait at least 10 seconds to be sure the augers have stopped rotating.
3.Always use a cleanout tool and never your hands.
4.Ground the spark plug when clearing if hands get close to the augers/impeller.
IMPORTANT! The snow blower belts are adjusted to ensure the augers/impeller stop turning within five (5) seconds of releasing the impeller control lever. If you are making any belt adjustments whatsoever, for your safety and the safety of others around you, you must ensure the belts are re- adjusted to achieve this design specification.
DANGER: Do not bypass, modify, alter or disconnect the safety system. Make sure that the safety interlock system is fully operational each time before operating the machine.
Rev: 12/21/2011
GASOLINE IS HIGHLY FLAMMABLE AND
EXPLOSIVE. FUEL LEAKS, A LOOSE FUEL TANK,
OR A LOOSE FUEL VALVE CAN LEAD TO
SEVERE INJURY OR DEATH. DO NOT OPERATE THIS SNOW BLOWER IF ANY COMPONENT OF THE FUEL SYSTEM IS LOOSE OR LEAKS GASOLINE!
Before setting up your STANLEY snow blower, disconnect the spark plug wires from the spark plugs and ground them against the engine to prevent inadvertent starting. This step should be taken as a precaution whenever you are working on this machine.
Before attempting to use your snow blower, make sure you are familiar with all of the components and have read the manual.
Need Help?
Parts, Service
and Technical Assistance call:
Monday-Friday 8AM-5PM EST
customerservice@gxioutdoorpower.com
4
