TROUBLESHOOTING
SYMPTOM | CAUSE | REMEDY |
Leakage around drive sprocket. | Motor shaft seal failure. | Have unit serviced. |
No water discharge at bar. | Blocked port(s) in bar. | Turn off hydraulic supply. Remove bar |
|
| and chain and clean bar thoroughly. |
|
| Blow ports with compressed air. |
| Blocked inlet or outlet. | Turn off hydraulic supply. Remove bar |
|
| and chain. Make sure water supply |
|
| is on. Press trigger to see if water |
|
| exits near bar adjustment nut area (a |
|
| small port). If no water exits, have unit |
|
| serviced. |
21